-
Synea Power Edition: For the hardest materials
The Synea Power Edition is especially designed for heavy-duty applications, such as the removal of decayed materials, cavities, fillings, crowns, and bridges. These new high-speed contra-angle handpieces with a unique black push-button are built extra strong and durable.
They are the optimal solution for advanced ceramic material like zirconia that is increasingly being used in restorative dentistry. Thus, this up-to-date addition to the Synea family is the perfect complement to your existing handpiece range.
For heavy-duty applications
-
Zirconia-based dental restorations are becoming used more commonly. However, limited attention has been given to the difficulties experienced, concerning cutting, in removing the restorations when needed.(1)
-
Dental zirconia has posed a problem in removal […] due to its high flexural strength and hardness. Attempts to section dental zirconia often result in destroying multiple burs, loss of chair time, and frustration by the dentist and patient.(3)
-
[…] cutting of Zir [Zirconia] took about 1.5- and 7-fold longer than cutting of LD [lithium disilicate glass– ceramic] and L [leucite glass–ceramic], respectively.(1)
Studies show that
[…] high cutting force will decrease cutting efficiency on zirconia, rather than improve it.(1)
[…] a higher force for cutting of Zir […] increases the damage to the diamond burs, resulting in a decrease of the total cutting depth.(1)
[…] higher force may cause more damage to super coarse burs, which may decrease their cutting efficiency over time.(3)
The removal of zirconia restorations is a demanding procedure. Conventional contra-angle handpieces are struggling to keep up with cutting performance. Applying even more load to improve removal rate wears out the bur much faster (1, 3) and may risk thermal damage to vital teeth (2).
With the Synea Power Edition cutting efficiency is improved without having to apply extra heavy loads.
(photo: Dr. Irina Taha)
-
"A safe contra-angle handpiece for crown or bridge removal that also protects existing contra-angle handpieces!"
Dr. Florian Krekel
Munich (Germany) -
"Simply ingenious, the four-wheel drive among contra-angle handpieces!"
DDr. Simon Enzinger
Salzburg (Austria) -
"The Jeep® among contra-angle handpieces: robust, less susceptible to repair, reliable!"
Dr. Romana Krapf
Weißenhorn (Germany) -
"I am thrilled with the clamping system, it offers a better workflow when changing burs!"
Dr. Klaus Kohlpaintner
Bürmoos (Austria)
Extra robust chucking system for higher clamping force
With an unbelievable 20% increase in clamping force, the newly designed FG chucking system is made for heavy-load applications.
Multiple spray with high water flow for proper cooling
With three enlarged nozzles smartly placed around the bur and a water flow of more than 50 ml/min, the Synea Power Edition provides an impressive cooling and cutting level.
The integrated maintenance-free spray filter reliably prevents nozzle clogging and ensures a constant high-water quality.
All good things come in threes
With the special Synea 900-series, W&H has designed three extra powerful speed-increasing transmission instruments.
The premium line of the Synea range – the Synea Vision – is complemented with the WK-900 LT, while the Synea Fusion portfolio is reinforced with the WG-900 LT (with light) and the WG-900 A (without light).
Synea qualities at a glance
- Ceramic ball bearings for smooth operation with less vibration
- Monobloc design for better hygiene
- Heat Blocker technology that keeps the push button cool, to protect you and your patients from burns
- Compact glass rod for constant light quality and the optimal illumination of the treatment site (WK-900 LT / WG-900 LT)
- Scratch-Blocker coating for long-term value retention (WK-900 LT)
- 36-month warranty (WK-900 LT) and 24-month warranty for WG-900 LT/A)
extra tough for the removal of high-strength materials
extra precise with new head design for better bur guidance
extra easy bur changes with unique and distinctive black push-button design
Even rotary instruments designed for heavy-load applications show decreasing removal rate over time when cutting hard materials (1, 4). To keep up with cutting performance, rotary instruments need to be changed more frequently. Hence, you
will appreciate the newly designed black push-button of the Synea Power Edition. It makes the bur change noticeably easier as forces are better distributed.
extra solid chucking system with more than 20% more clamping force
With an unbelievable 20% increase in clamping force, the newly designed FG chucking system is made for heavy-load applications.
extra strong with more torque and better removal rate
extra durable with at least 20% extended lifetime
When cutting harder materials, conventional contra-angle handpieces are subject to considerable wear. Long downtimes and high maintenance costs are the result. In contrast, Synea Power Edition contra-angle handpieces are extra durable and feature an especially robust clamping system. They are less susceptible to mechanical failures and offer an incomparably longer service life of at least 20% compared to standard transmission instruments.
extra robust for less service costs
New head design and optimal ergonomics For better bur guidance the head is placed slightly higher. With the optimised shaft design, a secure grip and a perfect balance is ensured, especially in combination with the small electric motors from W&H.
Synea Power Edition Contra-angle Handpieces
WK-900 LT
Contra-angle handpiece 1:4, 3-fold spray, head size Ø 10,7 mm, press-button chuck system for FG burs Ø 1,6 mm
WK-900 LT
REF 30418000
Synea Vision Power Edition
with light (compact glass rod)
Indications
› Cutting of crowns and bridges
› Cavities and crown preparation
› Removal of fillings
Request price
WG-900 LT / A
Contra-angle handpiece 1:4, 3-fold spray, head size Ø 10,7 mm, press-button chuck system for FG burs Ø 1,6 mm
WG-900 LT
REF 30459000
Synea Fusion Power Edition
with light (compact glass rod)
WG-900 A
REF 30460000
no light
Indications
› Cutting of crowns and bridges
› Cavities and crown preparation
› Removal of fillings
Request price
Download Area
FAQ
Instructions for use
Find all languages of the Update Hygiene and Maintenance (EN ISO 17664:2017) in the Download Centre.
Videos & Tutorials
For a seamless and interactive online experience of our multimedia content (e.g. videos, maps), please accept the storage of the necessary cookies (YouTube, MovingImage - detailed information on these cookies can be found in the imprint/data protection) for marketing purposes.
Accept
